Recommended Extension Piece for a Rhino Rack Sunseeker Awning

Question

Question:

Will extension 32111 work with this awning, or is 31101 the preferred extension?

asked by: David B

0

Expert Reply:

David, unfortunately the Extension Piece for Rhino-Rack Sunseeker 49 Sq Ft and Batwing Compact Awnings # RR32111 is not going to work with the Rhino-Rack Sunseeker Awning # RR32133 so you would need to use the Extension Piece for Rhino-Rack Sunseeker, Batwing, and Foxwing Awnings # RR31101.

expert reply by: Bryce D

0

John H.

12/15/2025

Hey David, did the 31101 extension end up working well with your Sunseeker awning? Knowing how the fit turned out could help others looking at the same setup.

Answer 1

The outer diameter of the tire size you have of 205/75R14 is 26.3 inches so a cover like the #290-3954 would be your best option.

view full answer...

Answer 2

For the Rhino Rack Sunseeker Awning part #RR32132 we do have solid side panels with part #RR32112 as well as the front panel part #RR32111.

view full answer...

Answer 3

The Rhino Rack #RR32133 Sunseeker Awning is rectangular. The longer dimension is the width, at 8 feet if your're looking straight at the side of the vehicle. The awning extends out from its attachment point away from the vehicle by almost 7 feet.…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Hey Jesus! The #e98ZR comes with an alignment collar and a hitch pin. The Curt #C31006 does not include these and costs a little more. Outside of that, they are the exact same spare mount with different branding. What rig are you setting this up on?

view full answer...

Answer 6

Hello Rey, thanks for reaching out. Sadly, no, the Rhino-Rack Sunseeker Freestanding Awning #RR23AG will not work with the 59" long Pioneer Platform. For the awning, the mounts must be installed at a minimum of 62" apart, so the 59"…

view full answer...

Answer 7

Roof racks can add some wind noise. Luckily there is a solution for that. If you install a wind fairing you'll direct the air over the bars and the noise will go away. For a fairing to use with the Malone roof rack part #MPG201 the part #INA261…

view full answer...

Answer 8

Thanks for your question, Stevan! The Rhino-Rack Sunseeker Freestanding Awning part #RR23AG can in fact be mounted on the Rhino Rack Aero crossbars. The awning will attach via the t-slots on the crossbars. You do want to make sure that your crossbars…

view full answer...

Answer 9

Hey Jared, the length of the Replacement Support Arm for Thule Omnistor 5200 Motorized Awning #LC62TF that you referenced is 1.9 meters.

view full answer...

Answer 10

Yeah, that things fun with camper shells. I've got exactly what you need though Lauren. If your Leer XR camper shell does not have tracks installed, I recommend the Rhino-Rack Heavy-Duty Roof Rack for Camper Shells item #Y01-120B with 54"…

view full answer...

Answer 11

The Vortex Aero crossbars item #RRVA165B-2 do fit your 2015 Chevy Express Van. You will need a couple more components to add a roof rack though. For this you will want the Chevrolet Express Van Roof Rack by Rhino Rack. This system has a 220 lbs…

view full answer...

Answer 12

The Rhino-Rack Roof Rack Legs #RRRL150GMC-2 are 5-15/16" tall while the Inno Feet for Square Crossbars #IN72FR are only 5-1/2" tall. If you choose to go with #IN72FR your roof rack would just sit 7/16" lower than it would with the…

view full answer...

Recommended Extension Piece for a Rhino Rack Sunseeker Awning

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching