Looking For Replacement For 1998 Kwikee 909513 Control Module Series 40

Published 11/05/2024

Question:

I have a 1998 Kwikee 909513 Control Module Series 40 in need of replacement. I noticed you recommend Kwikee/Lippert P/N: LC379606. My question is will this work, I can see that the wire harness is different is not the same as whats coming from the step.

asked by: Mike T

Expert Reply:

Hello Mike, thanks for reaching out. The Replacement Control Unit for Kwikee Electric RV Steps # LC379606 is the correct replacement for the 909513 Control Module. We have had A LOT of customers successfully use the # LC379606 as a replacement, since the 909513 was quite common back in the day. I do not have a wiring diagram or anything like that showing exactly how to connect but all of the wires on the new controller will be labeled so as long as they are wired correctly it will work for you.

expert reply by: Jesse M

Mike T.

11/5/2024

Ok, wanted to ensure this would work pre-1999 and with the 40 series. So your recommending to bypass the harness and direct wire everything? Thanks,

Jesse M.

11/5/2024

@MikeT We have heard that it does work with pre 1999 models. The new controller comes with the parts needed to wire in the new harness. I have linked the instruction manual for you below. Take a look at the diagram on page 5. You will attach a new pigtail to the coach wiring and this will be used to plug in the new controller.

Mike T.

11/5/2024

@JesseM Ok, makes sense. I may have no choice but to give this a try. Thank you!