Galvanized Trailer Wheel Recommendation that fit 20.5x8.0-10 Tires
Published 05/28/2014
Question:
Due to clearance limitation, I run 20.5x8.0-10 load range F 105 psi Carlisle 5193811 bias ply tires. I need galvanized wheels. 5 lug on a B.C. 4.5. Please advise if you carry such, and spigot diameter.
asked by: Dave C
0
Expert Reply:
For a galvanized steel wheel that will fit 20.5x8.0-10 tires and has a bolt pattern of 5 on 4-1/2 inches you would want the Americana Steel Trailer Wheel # AM20048.
The pilot diameter of this rim is 2.8 inches, I also attached a review video for this rim.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Steel Trailer Wheel - 10" x 6" Rim - 5 on 4-1/2 - Galvanized Finish
- Trailer Tires and Wheels
- Wheel Only
- 10 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Americana
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can I Swap Out 4.80x12 Tires for 20.5x8x10 Tires for More Stability?
- Q&A: What PSI Is Needed For Load Range E Tires On Trailer Carrying Pontoon Boat
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Changing Tire & Wheel Size To Raise The Height Of Your Trailer
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Q&A: Recommended 215/60-8 Wheel/Tire Combo for Snowmobile Trailer
- Q&A: What Other Parts Are Needed To Install The Dexter Self-Contained Hydraulic Jack DX72CR
- Q&A: Recommended Axle-Less Torsion System for Custom Lightweight Trailer
- Q&A: Comparing Kenda 205/65-10 Trailer Tires Load Rating B and C
- Article: Where to Position the Trailer Axle?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Tire Sizing
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)