Replacement Water Inlet for 2025 Coachmen Apex Nano 194BHS
Updated 10/14/2024 | Published 10/12/2024
Products Featured in This Question
Question:
I have a 2025 Coachmen Apex Nano 194BHS. One of the kids removed the plastic coupler from the fresh water inlet today and I can’t seem to make it fit back on. I don’t know that I have a choice other than to replace the whole inlet. Can you tell me which replacement inlet plastic is ok but I think I may prefer metal is compatible? Thanks.
asked by: Kris W
Expert Reply:
Hi Kris; I'm not sure if it is the city water or gravity fill inlet but we have options for both. I don't have a way to know for sure what is on the 2025 Coachmen Apex Nano 194BHS but I it looks like they're separate black recessed inlets.
For the city water you could use the Valterra RV Water Inlet # A01-0178LFVP which has a 2-3/4" recessed metal flange. For the gravity fill we have the Valterra RV Gravity Fill Water Inlet # A01-2003BKVP which fits a 3-1/2" cutout with an overall diameter of 4-1/2". You can compare these to what you have now. The city water inlet is metal but the gravity is plastic.
I went ahead and attached a link to all of our water inlets below for your reference.
Product Page this Question was Asked From
Valterra RV Water Inlet - City Water - 2-3/4" Metal Recessed Flange - Brass FPT
- RV Water Inlets
- City Fill Inlet
- Recessed Mount
- Metal
- Brass
- Black
- Valterra
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Do You Sell A Hose/Shower For The B And B Molders BM82GR?
- Q&A: Does Weigh Safe Flap Jack Have Enough Capacity For 2019 Grand Design Momentum 397TH?
- Q&A: Replacement Shroud for a Dometic Model 620525.331c
- Q&A: What Does Working Load Limit Mean for E-Track
- Q&A: Will Advent Air Low Profile RV Air Conditioner Plug In to Dometic AC System
- Q&A: How to Wire a 7-Way Trailer Connector on a 2015 Chevrolet Silverado 1500
- Q&A: Replacement Propane Gas Detector for an Atwood 31013 Propane Detector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: What is the Best Trailer or RV Storage Cover
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide
Kris W.
10/14/2024
Hi Robin, Thanks for the reply. This is the city water inlet (not the gravity fill for the fresh water tank). It seems to be a surface mount, not recessed. It looks like one of the B&B Molds replacements will fit. But I need to make sure of the flange width. I noticed the depth comes in 1-5/8 and 1-11/16. I’m not sure how to know what depth to select without removing the inlet and measuring. Does this really matter that much? I wasn’t sure it 1/16 of an inch would make or break the connection. Thank you.