How to Program Global Link RV Entry Door Locking Latch Kit

Updated 12/22/2025 | Published 10/01/2024

Question:

How to program or or add new code.

asked by: George D

Global Link RV Entry Door Locking Latch Kit
(click to enlarge)

Expert Reply:

Hello George; you can change the user PIN for the # GL55VR through the Global Link Connect app using the following steps:

1. Tap Settings and then tap Devices.
2. Tap the lock whose PIN you want to change.
Note: You also can navigate directly to the Lock Settings screen by pressing and holding
the lock’s padlock icon on the home screen.
3. On the Lock Settings screen, tap the pencil icon next to the PIN field.
4. On the Change PIN screen (Figure 5), enter the new PIN twice.
5. Tap Save.
A notification message appears indicating the PIN was successfully set. The lock sounds
three varied beeps to indicate the new PIN was set.

You can only change the User PIN since the factory PIN is preprogrammed and cannot be erased. The factory default PIN is the 4-digit PIN printed on the purple key tag affixed to the inside handle of the lock.

expert reply by: Robin H

Robin H.

12/22/2025

Hey George, did the steps in the Global Link Connect app work for changing your user PIN on the GL55VR lock? Sharing how it went could guide others trying to update their codes too.