Pipe Outer Dimensions for Mount Section on Trailer Valet JXS Drill Powered Swivel Trailer Jack
Updated 01/05/2026 | Published 09/23/2024
Question:
I am looking to use the TVJX5-S pipe swivel jack on my trailer. It has a pipe already welded on to the trailer. Is this a standard size? What is the OD on the pipe bracket sold with the jack. My current pipe needs to be the same.
asked by: John
0
Expert Reply:
Hey John, thanks for reaching out!
The OD of the pipe section on the jack part of the Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate # TV64FR is 2" according to my contact at Trailer Valet.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Trailer Valet JXS Drill Powered Swivel Jack w/ Footplate - 14" Lift - 1,600 lbs
- Trailer Jack
- Boat Trailer
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Side-Mount Jacks
- Swivel Jacks
- Sidewind Jack
- 1001 - 2000 lbs
- Drill-Powered Jack
- Manual Jack
- 14 Inch Lift
- Bolt-On
- With Rectangle Foot
- Trailer Valet
more information >
Continue Researching
- Shop: Trailer Valet JX Drill Powered Jack - Pipe Mount - 14-1/2" Lift - 1,800 lbs
- Q&A: Recommended Side Mount Bolt on Trailer Jack for 5" Frame Height
- Q&A: What Size Wire And Circuit Breaker Should Be Used For The 12v Circuit On A 7-Way?
- Q&A: Distance From Pipe Mount to Bottom of Trailer Valet JX Trailer Jack When Retracted
- Q&A: Is There A Low Profile Electric Trailer Jack That Allows SUV Trunk To Open?
- Q&A: Choosing Between A-Frame and Side-Mount Swivel Jacks That Have Drill Attachment
- Q&A: Can Trailer Valet TV64FR Pipe Mount 5K Jack Be Removed From Trailer By Pulling Pin
- Q&A: Moving The Jack To The Side Of Trailer Frame For Tailgate Clearance
- Article: Trailer Tire Sizing
- Article: The Best Electric Trailer Jacks of 2025
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: What To Look For When Buying Ratchet Straps
- Article: 5 Things to Know About Weight Distribution Hitches
Robin H.
1/5/2026
Hey John, did the 2-inch pipe size on the Trailer Valet jack match the pipe on your trailer? Knowing how that fit worked out could help others checking their setup too.