Looking For Replacement Hardware For B&W Turnoverball Gooseneck Hitch

Question

Question:

My mechanic removed my Bandw turn over while working on my truck and lost the bolts. Do you have a bolt kit or can you provide a list of the bolts required?

asked by: Micah

0

Expert Reply:

Hello Michah, thanks for reaching out. I do have a solution for you, but unfortunately we do not offer a separate hardware/bolt kit for the B&W Turnoverball gooseneck hitch. What we can offer you is a new installation kit for your Turnoverball. This will come with all of the hardware as well as the frame brackets and crossmembers. If you can tell me the year, make, model and bed size of your truck, or the model number of your Turnoverball hitch, I am happy to recommend the correct installation kit

expert reply by: Jesse M

0

Micah

9/18/2024

So basically I have to buy a brand new hitch.

Jesse M.

9/18/2024

@Micah Not the whole hitch. Just the installation kit. For example if you have the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1309, you would use the installation kit # BWGNRM1309. This contains all hardware, frame brackets and crossmembers and it is less than half the price of the whole hitch. The link below will show you an itemized hardware list if you want to attempt to find hardware locally. https://www.bwtrailerhitches.com/sites/default/files/kits/documents/1309%20%28pn%201309-1-1021%29%2005%2017%202024.pdf

Micah

9/18/2024

2006 dodge ram 2500 long bed

Jesse M.

9/18/2024

@Micah Great! The 2006 Ram 2500 long bed uses the B&W Turnoverball # BWGNRK1313. For this the installation kit is part # BWGNRM1313.

Answer 1

If you already have tthe B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs #BWGNRK1108 which is the correct fit for your 2000 Ford F-350 then you will need to check out the instructions for the bolt you are…

view full answer...

Answer 2

Hey Jim, congrats on the new truck. To convert your B&W Companion 5th Wheel Hitch w/ Slider item #BWRVK3400-5W to work with the Ford factory puck system we have two options. Which one you need is going to depend on whether you want another slider…

view full answer...

Answer 3

I attached a link to the install instructions for the B and W Companion Hitch part #BWRVK3500 you referenced plus attached a review video that walks you through the install process. You would basically just need to reverse the steps in the video.…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Looking For Replacement Hardware For B&W Turnoverball Gooseneck Hitch

Product Page this Question was Asked From

Continue Researching