Recommended Replacement 3-Leaf Springs for 24" Double Eye Leaf Springs
Updated 01/12/2026 | Published 09/04/2024
Question:
In need of replacement 3-leaf springs for a 2500lb.Lippert axle. Eye to eye 24. 2009 Custom Cruiser 18FB. Double axle.
asked by: Kevin H
Expert Reply:
Hey Kevin, so at that capacity the closest leaf springs we have is going to be the 3-Leaf Double-Eye Spring for 2,500-lb Trailer # DX63CR which is 23 1/8" long.
We do have other springs in the 24"-ish ball park, but they're going to be under capacity and slipper springs.
This springs are measured unloaded, so I'd recommend doing the same if you didn't already to make sure that you do in fact have 24" eye to eye springs. If you measured these loaded, then the measurement could be different enough to where these would work.
Product Page this Question was Asked From
3-Leaf Double-Eye Spring for 2,500-lb Trailer Axles - 23-1/8" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushings
- 2500 lbs
- 1-3/4 Inch Wide
- 3 Leaf
- 23-1/8 Inch Long
- Standard Grade
- Dexter
more information >
Continue Researching
- Q&A: Replacement Leaf Spring for a Dexter 072-097-00
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Q&A: How To Mount Redline Rear Hanger # 30-20 On A Trailer
- Q&A: How Does the Rear Hanger Get Welded to the Trailer Frame
- Q&A: Radial Trailer Tire to Replace Bias Ply 4.80-12 Trailer Tires
- Q&A: Can Trailer with Slipper Springs be Replaced with Double Eye Springs
- Q&A: Replacing Slipper Springs With Double-Eye Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: The Basics of Boat Trailer Bunks: Bunks or Rollers?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
Lazer S.
1/12/2026
Hey Kevin, did the 23-1/8" double-eye springs end up fitting your Custom Cruiser’s axle once you rechecked the unloaded length? Knowing how that measurement worked out could really help others matching springs to similar trailers.