Replacement Equalizer and Leaf Springs for Trailer
Updated 01/27/2026 | Published 08/17/2024
Products Featured in This Question
Question:
Want to buy parts to refurbish the axle spring parts on a trailer. I need the bolts, bushings, and the equalizer. Ive found a kit here but my equalizer measures 7 3/4 where yous is 5 3/4. I am just needing to replace worn parts and dont need hangers. Seems like the equalizer is the problem. And the springs are 25 3/4 c to c.
asked by: George K
Expert Reply:
Hi George; I see you already got the # MR46ZR so you're covered on the bolts, shackles, and bushings. That leaves your equalizers and leaf springs. For a replacement equalizer you can use the # TREQ104 which matches your 5-3/4" measurement.
To find replacement leaf springs I will also need to know your axle capacity. If you measured spring eye to spring eye make sure you accounted for the leaf springs flattening out over time. You can also get the flat length which will be the most accurate.
I attached an article below which explains how to get the flat length. If you can add that information along with the capacity in the comments below I can see what is available.
Product Page this Question was Asked From
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole
- Trailer Suspension Parts
- Standard Equalizer
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 5-3/4 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Q&A: Recommended 26" Long 4-Leaf Double-Eye Spring for 4,000 lbs Trailer Axles
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Replacement 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: What Upgraded Equalizer Can I Use to Replace My 5 5/8" Long Standard Equalizer?
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Equalizer for a EQ-356
- Article: How to Measure a Trailer Axle
- Article: How to Raise Your Travel Trailer Height
- Article: Spring Towing Readiness Checklist
- Article: Most Popular Wheel Bearings
Robin H.
1/27/2026
Hey George, were you able to get the flat length and axle capacity for your trailer springs? Once you have those details, I can help narrow down the right replacements. Let me know what you find—I'm here if you need a hand matching them up.