Will Pontoon Boat Bolster Brackets # Work On Boat Lift Designed For A V-Hull Boat
Updated 05/19/2014 | Published 05/16/2014
Question:
Hi I have a vertical boat lift that is set up for a v hull boat.Can I mount #CE26244G in place of the current bunks and use them for a pontoon boat? Thanks
asked by: Charly G
Expert Reply:
The CE Smith V-Wing Bolster Bracket, part # CE26244G we offer is designed to have either 2 X 6 or 2 X 8 boards mounted to them. They are made to sit under the pontoon on the boat and need to have a secure frame to be mounted to.
With knowing that the lift was designed for V-hull boats, I recommend contacting the lift manufacturer to see if it can be modified to accommodate a pontoon boat. Due to the difference in construction of the boats the lift may not be able to work with the pontoon boat.
Product Page this Question was Asked From
CE Smith V-Wing Bolster Bracket for Pontoon Boat Trailers - Galvanized Steel - Qty 1
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- 6 Inch Tall
- 3 Inch Wide
- Galvanized Steel
- 15-1/2 Inch Long
- CE Smith
more information >
Continue Researching
- Q&A: How Many Support Brackets Are Needed For A 14 Foot Bunk Board Carrying A Pontoon Boat?
- Q&A: How To Know Which Master Cylinder Will Be The Correct Replacement For A Surge Actuator
- Q&A: How Many Screws Are Included With The Stainless Steel Hex Lag Screw # FA74521?
- Q&A: Are There 78" Long Crossbars Available for the Malone EcoLight Trailer
- Q&A: How To Install Rollers On a Pontoon Boat
- Q&A: Would 7-Way Trailer Wiring Circuit Have Amperage Rating for Powering 13 amp Horn
- Q&A: Replacement Hub/Rotor for UFP 41030
- Article: How to Raise Your Travel Trailer Height
- Article: What To Look For When Buying Ratchet Straps