How to Measure for the Correct Slide Topper

Question

Question:

Hi, I’m interested in buying a Solera slide topper for my 2024 Gramd Surveyor 267RBSS, and am not sure which size I need. Can you please let me know the correct size? Thank you

asked by: Bobby B

0

Expert Reply:

I wish I could Bobby but I do not have any way of knowing what size slide topper you need either. There's no database available that shows me what size slider you have on your trailer. I am going to need you to take a measurement and email me back or comment below.

Measuring to pick out the correct slide topper for your 2024 Grand Surveyor 267RBSS is pretty easy. You just have to measure the box width including the flange on it. The Solera item # LCV000165061 you were looking at is for box widths between 146" - 151" wide.

Please note that you will need a minimum 7" of clearance on both sides of the slide-out.

expert reply by: Jerred H

0

Bobby B.

8/8/2024

Hi Jerrod, I measured my slide out from flange to flange and it is 149”, or 12’5” wide. Thanks, Bobby

Jerred H.

8/8/2024

@BobbyB Thanks for getting back to me Bobby! Since your slide out is 149" wide, The Solera RV Slide-Out Awning item # LCV000165061, you were looking at, would work great for you. You're right in the middle of its 146" - 151" range. Please note that you do need a minimum 7" of clearance on both sides of the slide-out.

Answer 1

In order to determine if there is space for both a slide topper and standard awning on your 2020 Grand Design Reflection 303RLS you will need to have at least 3" from the inside of the flange on the side of the slide to the outside of the…

view full answer...

Answer 2

Measuring to pick out the correct slide topper for an RV like your 2018 Forest River Rockwood is pretty easy. You have to measure the box width including the flange on it and you'll be set. So the Solera part #LCV000163288 that you referenced is…

view full answer...

Answer 3

Hey Kevin, thanks for reaching out. I Looked up the online manual for the 2025 Cadillac XT4 and according to the manual Dinghy towing is a no, but dolly towing is approved and will not damage the drivetrain. The manual does not call out the AWD being…

view full answer...

Answer 4

Hey Stephen, we have the 16 foot etrailer awning part #e84QV that would work great on your car hauler. How tall is the side of the trailer? It shouldn't be a problem but the arms of this awning are 69 inches tall. We spent a lot of time on our…

view full answer...

Answer 5

Hey Charles, Yep, the Demco Autoslide 5th Wheel Trailer Hitch for Chevy/GMC - Single Jaw - Underbed #DM36SV is a kit that includes the Underbed Rail and Installation Kit #DM8551004 and the Demco Autoslide 5th Wheel Trailer Hitch #DM8550022. The…

view full answer...

Answer 6

You do need 6 inches of clearance from the edges of your slide box in order to fit a Solera awning. To determine the correct slide-out awing you simply need to measure from flange to flange and the fabric will need to extend at least 2-1/2 inches…

view full answer...

Answer 7

Hey Eric! For air bags I recommend going with Firestone. They make the most durable and reliable air bags for your 2024 F-250. If you don't mind using your phone to control the air compressor you can use the Firestone Ride-Rite Air Bags w/ Easy…

view full answer...

Answer 8

We have exactly what you need! When choosing a slide topper you always pick one that is roughly 6" longer than the slide out. This will include the trim that goes around it. These are available in Blackor White and it really just comes down to…

view full answer...

Answer 9

Hey Michael! For some reason Toyota decided to use a double wall design on their receivers, which is why your old hitch pin won't fit. I recommend the InfiniteRule Hitch Lock for 2-1/2" Hitches #34061072-D for your 2022 Tacoma. This has a…

view full answer...

Answer 10

It's a very wise idea to invest in toppers that will protect your slide-out and all of its hardware while the slide is extended. A good rule of thumb with every topper is to have a few inches on either side covered as well as the slide-out…

view full answer...

Answer 11

The most likely cause of the "no signal" error you are receiving with the Furrion Vision S Wireless RV Backup Camera System part #FOS43TASF is due to an interruption on the camera's power wire. Make sure that the camera is receiving…

view full answer...

Answer 12

You're correct, the Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen #FOS43TASF has been known to need the 7-Way Vehicle Power Adapter w/ Power Switch for Furrion RV Observation Camera Item #FR87PR…

view full answer...

How to Measure for the Correct Slide Topper

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching