Recommended Axle w/ a 4" Drop and 89" Hub Face
Updated 07/29/2024 | Published 07/26/2024
Products Featured in This Question
Question:
NEED TRAILER AXLE HUB TO HUB 85 INCHES. SPRING TO SPRING CENTER 70 INCHES WITH A 4 INCH . I DIDNT SEE ON ON YOUR WEB SITE, PLEASE ADVISE
asked by: Joseph C
0
Expert Reply:
Sorry but the closest axle we have to the dimensions you listed is the Dexter Trailer Axle Beam with 4" Drop E-Z Lube Spindles item # 8327812. It's got a 89" hub face though and the spring seats sit at 74".
The only other solution I would have is an axle-less system like the Timbren item # ASR3500S04.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Trailer Axle Beam with Easy Grease Spindles - 4" Drop - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 7000 lbs
- Spindles Only
- 79-1/4 Inch Spring Center
- 95 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Troubleshooting An E5 Error Code On A Fogatti Tankless Water Heater
- Q&A: What is Needed to Install 8k Roadmaster Comfort Ride System on 7k 3 inch Axles
- Q&A: Availability of Grease Seal Ring for Seal on 22834 Trailer Hub
- Q&A: 7k Trailer Axle Needed With A 95" Hub Face And 80" Spring Center
- Q&A: Trailer Idler Hub That Uses a LM67048 Bearing and Has a 5 on 4-1/2 Inch Bolt Pattern
- Q&A: What Causes E5 Error Code On Fogatti RV Tankless Water Heater
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Q&A: Can A Roadmaster Comfort Ride Suspension Be Installed A Trailer That Rides Slightly Nose High
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Frequently Asked Questions About Transmission Coolers
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer