WHat Info Is Needed to Pick Out Replacement Leaf Springs and U-Bolts Trailer Suspension
Updated 02/03/2026 | Published 07/04/2024
Question:
I need 2 springs and 4 u bolts,help me here
asked by: William E
0
Expert Reply:
Hey William I will need to know the axle capacity of your trailer and the length of your current springs to determine what springs you'd need and the correct U-bolts to go with it. I would also need to know if you need double eye springs or if you need slipper springs.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Trailer Leaf Springs
- Slipper Springs
- 9/16 Inch Eye
- Nylon Bushings
- 3700 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 30 Inch Long
- Standard Grade
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: What Size of Boat Trailer do I Need?
- Q&A: What Breakers Fit the WFCO WF25FR 30 Amp RV Distribution Panel?
- Q&A: Looking for Replacement Wet bolt for 2020 Bighorn 3300DL
- Q&A: Replacing Slipper Springs on Boat Trailer for 3,500 lb Axle
- Q&A: Replacement 2,500 lbs - 3,500 lbs Axle w/a 86.5" Hub Face and a 68.5" Spring Center
- Q&A: Where Should End of Slipper Spring Sit On Hanger on Single Axle Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Replacement Axle for 5 x 10 Utility Trailer
- Q&A: Replacement Recommendation for 3.5K Single Leaf Trailer Spring
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How Much Does a Boat and Trailer Weigh?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Replace Trailer Leaf Springs in 5 Steps
Jameson C.
2/3/2026
Hey William, did you get a chance to measure your trailer’s axle capacity and spring length? Once you have those details, I can help you match the right springs and U-bolts. Let me know what you find so we can narrow it down.