MORryde Suspension Enhancement For a 2022 Grand Design Transcend 265BH
Published 05/29/2024
Products Featured in This Question
Question:
I have some general questions about some upgrades that I am doing to my 2022 grand design transcend 265bh. I am upgrading to the morryde cre3000 and wet bolt kit and looking for any additional recommendations you may have to add. Also I am upgrading the tires to transeagle cr225/75-15 12ply and I am putting them on the factory steel wheels. I am trying to find out with my 7300lb dry weight tandum axle camper what the recommended cold psi should be and I cannot find any type of inflation charts. And would you recomend that I upgrade the valve stems from the rubber to a bolt on. Just looking for recommendations and a bit of guidance. Thank you for your time Jerry
asked by: Jerry W
Helpful Expert Reply:
You are already on a great path Jerry for your 2022 Grand Design Transend 265BH. The MORryde CRE3000 # MR87ZR equalizers along with the Wet Bolt Kit # MR46ZR are a great starting point. I would look at adding the MORryde X-Factor Crossmember # MR33WR to the center hanger to help give the suspension some lateral support and reduce stress when turning.
As far as the tires the only company I am aware of that gives different pressure ratings based on load is Goodyear so unless Transeagle tells you otherwise you will want to run the maximum cold PSI given on the side of the tire. For the valve stems if you are using rubber then I always recommend having them replaced with the tires. If you want to upgrade to Steel Valve Stems # AM20906 you can easily have that done when they change the tires. These are less likely to become damaged than the rubber stems over time.
Product Page this Question was Asked From
MORryde StepAbove RV Steps for 23-3/4" to 26-1/4" Wide Doorways - 4 Steps
- RV Steps
- Towable Camper
- Fold-Down Step
- 19-1/2 Inch Wide Step
- 22-1/4 Inch Wide
- 4 Steps
- 8 Inch Drop/Rise
- 37 Inch Entry
- 38 Inch Entry
- 39 Inch Entry
- 40 Inch Entry
- 41 Inch Entry
- 42 Inch Entry
- Aluminum
- MORryde
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: morryde
- Video: A Closer Look at the MORryde I-Beam Mounted Stabilizer
- Q&A: Will Lets Go Aero Jack-It PLUS Bike Rack # LGA47ZR Work For 42 lb Velotric Breeze E-Bikes?
- Video: Review of MORryde Camper Jacks - I-Beam Mounted Stabilizer - MR96RV
- Search Results: truck bed mats
- Search Results: truck bed extender
- Search Results: hitch expander
- Search Results: strongarm
- Video: Comparing Classic Accessories RV Camper Covers
- Search Results: shocks
- Search Results: heavy duty shocks
- Shop: Aluminum Eagle Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black
- Shop: MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Video: All About the MORryde X-Factor Crossmember for LRE, RE, or TRE Leaf Spring Suspension
- Shop: RV Covers
- Shop: etrailer 2 Swivel Jacks w/ Bolt-On Mounting Plates - Sidewind - 15-1/2" Travel - 3,000 lbs
- Shop: MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K
- Shop: MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers - 35" Wheelbase
- Video: Detailed Breakdown of the 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles
- Shop: Lets Go Aero Jack-E Bike Rack for Electric Bikes - Trailer Tongue Rack
- Shop: DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Video: An In-Depth Look at the Adco SFS AquaShed RV Cover for Travel Trailers up to 15' 1/4" Long
- Video: etrailer Travel Trailer RV Covers Comprehensive Review
- Shop: Transmission Cooler
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Is It Safe to Tow Cross Country Using a 2-1/2 to 2 Reducer Sleeve
- Q&A: Recommended Equalizer Upgrade For 2020 Grand Design Transcend 265BH using Factory TREQ104 Equalizer
- Shop: Towing Mirrors
- Q&A: Correct Backup Camera System for a 2018 Grand Design Reflection That is Pre-Wired for a Camera
- Q&A: Recommended Surge Protector for 50 Amp 5th Wheel Trailer Connection to Shore Power