Wet Nut and Bolt to Use with Winnebago Trailer Suspension
Updated 05/29/2024 | Published 05/28/2024 >
Question:
Hi, 2018 Winnebago 25RKS 5th wheel, tandem axle. I had my shackles upgraded to the Dexter heavy duty shackles and wet bolts with bronze bushings last year. Today I was inspecting the suspension and saw that the bolts at the fixed ends of all the springs are not wet bolts, so Im thinking they did not replace those. What part number do I need for the bolts and bushings and nuts? The hanger measure 2 5/16 outside-to-outside. Thx
asked by: Daniel S
Expert Reply:
Hey Daniel, that's a bummer to hear they didn't do all of the work you paid them to. For wet bolts we have the # 126B2 which comes with a nut. To pick out a bushing though I would need to know the outer and inner diameter of what you have currently on the spring.
Product Page this Question was Asked From
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Leaf Spring for a Dexter 072-079-01 Leaf Spring
- Q&A: How Is the 32-Inch Length Measured on the CE Smith Trailer Fender # CES63WR?
- Q&A: Will The Kodiak Disc Brake Kit K2HR10A11RERR Fit An AL-KO 10k #99 Spindle?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Replacement for AL-KO 5,200 lb Axle
- Q&A: Dexter Heavy Duty Greasable Shackle Kit Needed
- Q&A: Replacement for a WFCO Converter WF-8845
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Replacement Option For Norcold N306.3 RV Fridge
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Double-Eye Trailer Suspension System Review


Daniel
5/29/2024
The i.d. of the spring eye is 0.75", although it looks like it may be rounded out a bit at the edges. The thin metal sleeve/bushing in there has an o.d. of 0.72". Thanks