Replacement Frame And Screen For A Ventline VD0434 RV Roof Vent

Question

Question:

We have a 2015 Lance 2285, need to replace the screen frame. Model number on screen is VDO434. Is this the correct replacement part? My guess the color might be birch white. Thank you!

asked by: Audrey

0

Ventline VD0434
(click to enlarge)

Expert Reply:

Hey Audrey,

To replace your Ventline VD0434 Roof Vent screen and frame you would need the Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents # BVC0573-31. This comes in birch white to match your vent's color.

expert reply by: Kevin C

0

Answer 1

The direct replacement for your Ventline screen with model number VD0434 is #BVD0434-31 (birch white) or #BVD0434-41 (polar white). This is compatible with Ventline Ventadome roof vent models V2092, V2110, V2094 and V2119. However, if you're…

view full answer...

Answer 2

Polar white is the whiter white than Birch so since it seems like you want the whitest option you would want the part #BVC0573-41.

view full answer...

Answer 3

It sounds like you may need the Replacement Slide for P-Series RV Screen Doors #A77022 on your 2014 Thor Hurricane 27K. This slide is only 11-11/16" tall versus the larger 12" like the Lippert Motor Home Entry Screen Door Bubble Slider…

view full answer...

Answer 4

If the part number for the screen on a Ventline Roof Vent is VDO434 then the correct replacement frame and screen is the Replacement Screen Frame with Screen for Ventline Ventadome Trailer Roof Vents part #BVC0573-31.

view full answer...

Answer 5

The replacement screen frames for the trailer roof vent on your 2011 Grey Wolf come in two different colors. For the Polar White you will need part #BVC0573-41. For the Birch White you will need part #BVC0573-31.

view full answer...

Answer 6

Your vent's screen part number VD0434 tells us you have a standard 14 x 14-inch roof vent and so you can select an interior ceiling garnish trim ring from the linked page. We have these in various shades of white and off-white and with different…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Audrey, To replace your Ventline VD0434 Roof Vent screen and frame you would need the Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents #BVC0573-31. This comes in birch white to match your vent's color.

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Replacement Frame And Screen For A Ventline VD0434 RV Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching