Are Replacement 9/16" - 18 Wheel Studs Available
Updated 05/28/2024 | Published 05/22/2024
Products Featured in This Question
Question:
Hello, I have a very old trailer, the wheels are mounted with 9/16-18 bolts. I would like to install studs instead. do you have something like this? Thank you
asked by: Ralph A
0
Expert Reply:
Hey Ralph,
We do offer some wheel studs you can change to, but you'll want to remove a stud to see if it's press-in or screw-in and just double check that the dimensions match up to the diagrams attached below. For press-in you could use the Kodiak Wheel Bolt # K916WB25 and for screw-in you could use part # 25-11.
expert reply by:
Kevin C
0
Product Page this Question was Asked From
Trailer Hub Wheel Stud, Screw-In, 9/16" x 3"
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 9/16 Inch Diameter
- Screw-In Stud
- 3 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Can 18.5 x 8.5 - 8 Tires be Replaced with 215/60-8 Tires
- Q&A: Is Pre-Greased Easy Grease Trailer Hub Compatible with LMX Red Grease
- Q&A: Best Way to Grease Trailer Hub that Has EZ Lube Spindles
- Q&A: Does Wheel have to Change When Going from Tire Size 9.50 x 16.5 to 235/80-16
- Q&A: Availability of 1/2-13 Screw-In Wheel Stud
- Q&A: Lug Nuts and Center Cap for Kenda KR25 Radial Tire and HWT Wheel # AM31208HWT
- Q&A: Wiring Diagram of the Replacement Hand Controller for Meyer Straight Blade Snowplow
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Most Popular Wheel Bearings
- Article: 7 Common Questions Everyone Has About Trailer Tires
Ralph A.
5/28/2024
Thank You