What is Difference Between Lippert # PSX1 and PSX2 Stabilizer Jacks  

I do have an option for you but we don't carry the Lippert PSX2 Stabilizer Jack 695602. Instead, we carry the Lippert High-Speed Power Stabilizer Jack part #LC369774 for a white switch, or part #LC298707 for a black switch. These are very…

For your Lippert PSx1 Stabilizer, the Replacement Electric Stabilizer Jack Support Arm part #LC1134122 is what you need if you are looking to simply repair your jack. If instead you are looking to replace the entire unit then the Lippert Components…

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in…

The Lippert Stabilizer Jack 347132 (discontinued part LC363284 on our site) has mounting hole centers that are 68-11/16" apart which is the same as our High-Speed Stabilizer Jack #LC298707 so it can definitely be used as a replacement! The…

I assume you are asking about wiring the switch of the Lippert Components High-Speed Power Stabilizer Jack #LC369774. For this, please refer to the accompanying cutout I added; your jack uses Switch #LC144214 so as the diagram makes clear, the black…

The replacement that you need is the Lippert Components Power Stabilizer Jack #LC298707. Some of our other options, like part #LC369774 that you referenced, is a kit, but the part #LC298707 is the basic jack that you will need. I spoke with my…

Yes, the 30" lift Lippert High-Speed Power Stabilizer Jack, #LC298707 can be installed on the front and rear of a travel trailer. Please note that this jack is designed to stabilize your trailer an not to support the full GVWR. Do not use these…

Thank you for the photo; we have the exact replacement for your Lippert 113407 electric stabilizer jack; the Lippert Components High-Speed Power Stabilizer Jack #LC369774.

The Lippert High-Speed Power Stabilizer Jack #LC369774 don't have a weight capacity because it is designed to essentially just fill the gap between your trailer frame and the ground - this isn't meant to lift the trailer so they haven't…

I do have a solution for you to have a working stabilizer again but unfortunately when I spoke with my contact at Lippert he said that the legs on your 198641 unit are not replaceable alone. Instead you will need to replace the whole stabilizer jack…

The Lippert High-Speed Power Stabilizer Jack #LC298707 would not be able to mount to your frame since you only have 68-1/4" from outside to outside edge and this stabilizer requires a 68-11/16" spacing. Instead I recommend installing the…

The replaceable parts for the Lippert PSX2 stabilizers include the following: Switch and Harness - #LC387874 Switch Hatch Box (White) - #LC134025 If you're needing to replace the entire unit we don't have the PSX2 but we do have the Lippert…