Replacement Arms For A Lippert Edge RV Awning Assembly

Question

Question:

I need a 58 inch awning arm. I do not need the drive motor. 1

asked by: Ron 1

0

Lippert Edge Awning 1
(click to enlarge)

Lippert Edge Awning 2
(click to enlarge)

Expert Reply:

Hi Ron,

The replacement arms for a Lippert Edge RV awning only come with their respective heads/motor included so you won't be able to purchase just the arm without the head. For the drive side you'll need part # LC22ED and for the idler # LC62ED.

expert reply by: Kevin C

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Since your Solera arm is 58 inches long that would indicate it's a Solera Edge awning which means for a replacement drive arm you would want the part #LC22ED or for a replacement idler arm part #LC62ED.

view full answer...

Answer 4

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Answer 5

For your 58 inch Lippert Edge RV awning the correct replacement idler arm is the part #LC62ED and the correct replacement drive arm (one with the motor) is the part #LC22ED.

view full answer...

Answer 6

Thank you for providing your part number Steve. I was able to verify you will need the Replacement Idler Arm Assembly #LC75AF. We also have the Replacement Drive Arm Assembly #LC85AF.

view full answer...

Answer 7

In order to determine the correct replacement for your Lippert Edge awning you'll need to measure the length of your wall mount (see attached photo). Once you've got that number you can look for a replacement based off of that measurement.…

view full answer...

Answer 8

Hi Ralph; according to Lippert, the only option is the complete replacement arm. I'm sorry to say the bracket is not something that is available separately. If you need both arms the #LC65AF will work or you can get the arms separately #LC62ED…

view full answer...

Answer 9

Hey Zach, we have entire replacement arms for the Lippert 2000 series awnings, so you just need to choose between the Drive Arm #LC85AF, and the Idler Arm #LC75AF. The idler arm is the one that doesn't have the motor whereas the drive arm has the…

view full answer...

Replacement Arms For A Lippert Edge RV Awning Assembly

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching