Is Gen-Y Glyder Shock Absorbing Ball Mount Overkill For Smaller Trailer

Updated 05/06/2024 | Published 05/05/2024

Products Featured in This Question

2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs

(3992)

$20.44

Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop - 7K

(37)

$219.95

2-5/16" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 10,000 lbs

(3992)

$26.52

etrailer Hitch Receiver Lock - 2", 2-1/2", & 3" Hitches - Chrome

(3765)

$25.51

Question:

Have a Rv trailer Intech Sol Dawn 2730lbs and TW is 300lbs, vehicle is Lexus GX460 with tow package. 6600lbs towing and 700lbs, is this overkill for towing small aluminum frame Rv

asked by: Manny

Expert Reply:

Hey Manny,

Even with a smaller trailer, it is not overkill and you can absolutely benefit using the Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches # 325-GH-12001.

A trailer, regardless of size, is still going to be rigid, bounce, and affect the ride of your tow vehicle and the trailer. So adding some cushioning like you get with the Glyder is definitely a good idea, and something I recommend.

So if you do decide to go with the ball mount you'll also need a hitch ball, either the 2" # C54CR or 2-5/16" # C40007. For a hitch lock use part # e98881.

expert reply by: Kyle S

Manny

5/6/2024

The Gen-Y will work, but need to 2in raise to low will bottom out. Is their adapted for the Gen-Y or I can use without using hitch riser?

Kyle S.

5/6/2024

@Manny The Gen-Y isn't available with a 2 inch rise and there isn't any type of adapter for it. The closest we can offer is a cushioned ball mount with a 2-3/4" rise, the Convert-A-Ball Ball Mount # AMSC4HD.

Manny

5/6/2024

@KyleS Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab - 7.5K Item # C45WR this will be perfect, but flip side and sway ball mount as one piece.

Kyle S.

5/6/2024

@Manny Unfortunately the # 325-GH-12001 can only be used in the drop position.