How To Measure For Replacement Wheels For A Boat Trailer
Updated 05/09/2024 | Published 05/04/2024
Question:
Looking for a boat trailer wheel. Looks like this but I measure 7 wide: Dexstar AM20447 That said, the tiere is ST205/75R14 so I guess the measured wheel diameter is not correct. Also, my wheels are a chrome finish. Im looking for this pattern match the rest. I can send pictures.
asked by: Gordon L
Expert Reply:
Hey Gordon,
If the sidewall of the tire says ST205/75R14 then you should have a 14" diameter wheel. The # AM20447 you were looking is a 15" wheel so you'd want to stick with a 14" wheel unless you have to clearance to increase the sizing. The wheel diameter is measured from bead to bead. I'd also check your wheel bolt pattern just to ensure you don't get the new wheel and find it doesn't match up to the stud pattern of the hub. I've attached a pic below showing how to measure.
If you want to send me some pictures of your current wheels I can take a look at the design and try to find a match for you. See if you can also find the load range by the tire code so we can make sure each wheel is rated for the same capacity.
(click to enlarge)
Product Page this Question was Asked From
Steel Spoke Trailer Wheel - 15" x 6" Rim - 5 on 4-1/2 - Galvanized Finish
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Americana
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: spindle nut washers
- Search Results: 4 lug trailer wheel
- Q&A: Is a Spindle Washer Needed Between the Spindle Nut and Outer Bearing on Dexter 5 on 4-1/2 Hubs
- Q&A: Recommended Replacement Hub for Dexter 8-91A
- Q&A: Needing Dexter Hub # 8-91A
- Q&A: Fit of D Washer and Tang Washer for 1-1/16 Inch Spindle
- Shop: Washer For 1" Spindle
- Shop: Steel Trailer Wheel - 8" x 3-3/4" Rim - 4 on 4 - White
- Shop: Steel Trailer Wheel - 8" x 3-3/4" Rim - 4 on 4 - Galvanized Finish
- Shop: Replacement Bearing Kit with Bearings L44649, Races L44610, Seal 10-9 - Fits 1.063" Spindles
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 4 on 4 - L44649 Bearings
- Video: Trailer Wheel Measurements
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer tires and wheels
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Search Results: spare tire mount
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Shop: Suspension Enhancement
- Search Results: trailer jack
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Boat Trailer Wheels
Gordon
5/6/2024
Hey Kevin, thanks for the reply. It is a 5 bolt pattern, 5 on 4 1/2. Load range C: Max load Dual: 710kg, 1570#. I have pictures; how / where do I upload them? I don't see any upload or attach link.