Is The SmartPlug RV Internet Inlet BDBPB Available

Question

Question:

Im looking for a relatively new Smartplug product. I believe their part number is BDBPB - it is their black housing with a blank . Do you have this part yet? Thanks Byron

asked by: Byron G

0

Expert Reply:

Hey Byron,

Sorry for the wait, I got the BDBPB added to our site under the SmartPlug RV Internet Inlet - 1 Ethernet Port - Black # SM96MJ.

expert reply by: Kevin C

0

Answer 1

Dave, you could use either the Black #SM96MJ or Gray #SM46MJ Port inlet and add the Coax #SM76MJ and Ethernet #SM38MJ inputs to get the connector you are looking for.

view full answer...

Answer 2

Hey Kevin, thanks for reaching out! At this point in time SmartPlug hasn't made a special connection for the Starlink internet system, but they do have their SmartPlug RV/Marine Data Port Inlet #SM36MJ. From my understanding Starlink has an…

view full answer...

Answer 3

No, sorry we only have the SmartPlug RV Internet Inlet item #SM96MJ which is the same part but with a black surround instead of stainless. It has the exact same connectors and the housing is still marine grade.

view full answer...

Answer 4

The SH code on the Prodigy Brake Controller, #90885, indicates that while idle, the brake controller is sensing a short in the brake wire. It is okay to keep driving but before you tow your trailer I'd recommend go over trailer wiring of your…

view full answer...

Answer 5

Even without the trailer connected, the 0.9 error code on the Tekonsha Prodigy Brake Controller is indicating that there is a ground problem to the brake controller along the white wire. Depending on the vehicle, the wire could be connected through…

view full answer...

Answer 6

I attached a picture that has a chart with all of the error codes for the Prodigy P2 part #90885 that you referenced. I am not sure what you mean by dashes on the display so hopefully the chart helps you. Feel free to email back with pictures of the…

view full answer...

Answer 7

The 0.9 error on the P2 #90885 means that a trailer is connected but the controller has lost connection to battery ground. Check the white brake controller wire. On a 2007 Chevy, depending on if it is new or old body style, it may or may not plug…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Is The SmartPlug RV Internet Inlet BDBPB Available

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching