Stainless Steel Slip On Rotor Disc Brake Kit for 8k Axle with 5/8 inch Wheel Bolt Holes
Updated 02/22/2024 | Published 02/21/2024
Products Featured in This Question
Question:
Is there a way to get this brake kit with 5/8 rotor holes
asked by: Steve C
0
Expert Reply:
Hey Steve, yes we do have a version of the Kodiak disc brake kit for 8k axles that is stainless and has 5/8 inch diameter bolt holes for the wheel studs with the part # K2R858DS.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Stainless - 9/16" Bolts - 8K Dexter Axle
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Rotor
- 8000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Kodiak
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will Kodiak 11" Disc Brakes Fit My 12K Trailer Axles With Dual Wheels?
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Q&A: Orientation of U-Bolt for Installing Leaf Springs on a Trailer
- Q&A: Could the EZ Flex Equalizers # K71-653-00 be Used on a Trailer that Weighs 11.5k
- Q&A: Recommended Dexter Suspension Kit for 7,000 Pound Tandem Axles on Toy Hauler
- Q&A: What is Weight Capacity of Dexter EZ Flex Equalizers
- Q&A: Upgrading Equalizers With Wet Bolts For a 2021 Grand Design Imagine 2910BH
- Q&A: Does the Center Hole On the Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs Need a Bushing
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
Steve H.
2/22/2024
Ok thanks. Do they also has a cheaper version? Heard there’s a coated one. Might have been a 7000lb version