Solution For Replacement Grease Seal With 1.72 ID and 2.33 OD
Published 01/16/2024
Question:
I have a small Chinese made trailer made to haul a motorcycle. It has a 1500 pound GAWR. The hub grease seals seem to be double lip with a 2.33OD and a 1.72ID. I do not see any such animal listed on your website. Have anyone seen a grease seal with these dimensions? Any help would be appreciated.
asked by: Kevin Y
Expert Reply:
Although I do not know of a grease seal that matches those exact dimensions you can use the # 010-180-00. The outer diameter is 2.33" so that is an exact match. The ID is slightly smaller at 1.68" but the rubber has some stretch to it so it will work with your spindle.
Product Page this Question was Asked From
Grease Seal - Double Lip - Inner Diameter 1.68" - Outer Diameter: 2.33" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.68 Inch I.D.
- 2.33 Inch O.D.
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Electric Trailer Brake Assembly w/ Parking Brake - 10" - Left Hand - 3,500 lbs
- Q&A: Wheel Seal With 1.63 ID and 2.375 OD
- Q&A: Grease Seal Recommendation to Replace AD2527E
- Q&A: Installation of Castle Nut On Hub
- Q&A: Correct Replacement for UFP H-1377 Trailer Hub
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Q&A: Will Fastway Zip Coiled Trailer Breakaway Cable FA80-01-2140 Work With ESCO Breakaway?
- Q&A: Specs for the Dexter 5-Leaf Slipper Spring W/ Flat End for 10K Axles
- Q&A: Replacement Grease Seal Recommendation for 32372 with OD 2.325 and ID of 1.680
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy