Is there an 8-1/2 Inch Trailer Wheel Size
Updated 04/15/2014 | Published 04/14/2014
Question:
I have a trailer with the rim a little more than 8 1/2 in in diameter. the bolt is 5- 4-1/2 in diameter. I was wondering can the AM3H240 product will fit my trailer. the trailer is a 2013 HMD
asked by: Tim
Expert Reply:
The actual diameter of a wheel is not the measurement that you would go by to determine the size wheel needed or tire to fit the wheel. The actual diameter of the wheel is always higher than the listed diameter so you likely do have 8 inch wheels. If you look on the tire side wall there should be a size listed. If that size is 165/65-8 then tire and wheel combo # AM3H240 is a fit based on the bolt pattern you listed.
Product Page this Question was Asked From
Kenda 165/65-8 Bias Trailer Tire with 8" Galvanized Wheel w/ Offset - 5 on 4-1/2 - Load Range C
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range C
- 165/65-8
- 8 Inch
- K - 65 mph
- 5 on 4-1/2 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Trailer Tire Size Close to 4.80-8 Tire Overall Diameter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Difference Between Trailer Tire Sizes 165/65-8 and 4.80-8
- Q&A: Availability of Trailer Wheel and Tire in Size 165/65-8 with Zero Offset
- Q&A: Correct Replacement Size for 16.5 x 6.5-8 Tires
- Q&A: What is the Wheel Backspacing of the Kenda Tire with 8 inch Galvanized Wheel # AM3H240
- Q&A: Choosing Between White Painted Wheel And Galvanized Wheel For Boat Trailer
- Q&A: Trailer Tire Size 215/60-8 vs 205/65-10 on a 2 Place Snowmobile Trailer
- Article: Slipper Spring Trailer Suspension System Review
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Hitch Installation Tips
- Article: How to Determine Tire/Wheel Diameter
- Article: How to Install E-Track in 3 Easy Steps