Mounting Hole Dimensions and Interior Opening For Replacement Black Trim Kit # Trim-BL-FR03

Question

Question:

Will this black trim kit fit and work for a built-in 2.2cu ft Panasonic Microwave Oven NN-SN966S? Panasonic only makes a stainless steel trim.

asked by: Janice

0

Expert Reply:

I have included an image with the measurements for the opening and mounting holes on the Black Trim Kit # Trim-BL-FR03. You will need to compare these with your Panasonic Microwave as we do not have one here to verify all the measurements to ensure if it will fit.

If the measurements are different you can always have the stainless version from Panasonic sent out to a powder coater or painter in your area to make it black.

expert reply by: Bud M

0

Black Trim Kit Mounting Holes Measurements and Inner Dimensions
(click to enlarge)

Answer 1

No, I am sorry we do not David. It's the depth that's really limiting you to the Greystone Built-In RV Convection Microwave item #GR27FR you were looking at. We have a microwave, convection, air fryer combo that checks all the boxes except…

view full answer...

Answer 2

Hello Richard, thanks for reaching out. With only 9-1/2" from the wall to the center of the toilet, this will definitely be a limiting factor in what toilets you can use. We do have a standard height toilet option that will work with the…

view full answer...

Answer 3

Yes, the 0.9 Cu Ft Greystone Standard RV Microwave - 900 Watts #324-000105 is a great replacement for your Advent model MW912B as the only real differences is the Greystone being 1/8" taller without the trim, and being about 1" less deep.…

view full answer...

Answer 4

Hey Doug, That's a good question because fit is really important so the cover stays snug on your trailer, and there is a specific way to measure for the etrailer covers. It's pretty simple, and what you want to do is measure the body of the…

view full answer...

Answer 5

Hey Jim! Unfortunately, your experience is pretty common with RV covers. Constant UV exposure is hard on any cover, and most don't significantly outlast their warranty period. The Classic Accessories PolyPro III #052963793635 uses a triple-ply…

view full answer...

Answer 6

To determine the correct size RV storage cover for your Coleman Lantern LT Travel Trailer you'll need to measure the body length. In the attached picture below you'll see exactly how to measure. Once you have this measurement you can choose…

view full answer...

Answer 7

I recommend the Classic Accessories Deluxe PolyPro III Heavy-Duty Pop-Up Camper Cover, part #CA80038 for your 8 X 10 pop-up camper. This cover has corrosion-resistant grommets and draw cords that help to give a tight, secures fit and keep out rain,…

view full answer...

Answer 8

Hey Bob, thanks for reaching out. The standard PD9160A was designed around lead-acid charging profiles, so that won't provide a proper charge to your lithium batteries. The best move will be to upgrade to the Progressive Dynamics 9300 Series RV…

view full answer...

Answer 9

Hi Larry! No, the ADCO SFS AquaShed RV Cover for Travel Trailers up to 28-1/2' Long, part #290-52244, only has a side access panel, so it does not provide access to the rear door of the trailer. If rear door access is what you need, the ADCO SFS…

view full answer...

Answer 10

Hi Jeff, Nice choice with the 100 amp hour Go Power Lithium RV Battery #GP99QR as well as the Expansion Kit #34282182. Also, you can absolutely replace your PD9260 with the PD9360 model that is compatible with lithium batteries, and our part number…

view full answer...

Answer 11

Hello again Robert; you can definitely add those steps to your 2023 Forest River Sunseeker 3250. To find the correct steps you need to measure. Assuming the entry height is 19-1/2"-22-1/2" then the 2 step version is correct. The Tread Lite…

view full answer...

Mounting Hole Dimensions and Interior Opening For Replacement Black Trim Kit # Trim-BL-FR03

Product Page this Question was Asked From

Continue Researching