Grease & Zerk Size For Blue Ox SwayPro

Question

Question:

What size grease fitting goes in blue ox sway pro head. Thanks.

asked by: Narvel L

0

Expert Reply:

The SwayPro uses standard 1/4" grease zerks; for grease and a grease gun use LubriMatic Moly EP Grease # LM54FR and Grease Gun # L30200.

expert reply by: Kyle S

0

Answer 1

Hey Angela, you’re thinking about this exactly the right way. Electric tongue jacks are sized based on tongue weight, not total trailer weight. With your 750–800 lb tongue weight, the 3,500 lb models of our etrailer electric trailer jacks #e72QV or…

view full answer...

Answer 2

Yes, the UltraLube Biobased Moly EP Grease part #LM54FR is a molybdenum based grease so it will work with the Blue Ox Sway Pro Weight Distribution Systems like part #BXW1500.

view full answer...

Answer 3

You are correct that in the Blue Ox SwayPro Owner's Manual they do recommend use molybdenum grease on both the hitch ball and the spring bars. The LubriMatic Moly EP Grease #LM54FR in a grease gun, such as #L30480, will work well. You could use…

view full answer...

Answer 4

Hey Chris! The black wire on the etrailer Electric Trailer Jack #e23ZV is just a ground wire. Realistically you can ground it however you want but I would say running it to the frame with a self-tapping screw as indicated in the instructions is the…

view full answer...

Answer 5

Hey Reginald, We do in fact have the manual for that jack! I am getting it added to the website but will go ahead and attach and image of it for you below. Was there anything specific you were wanting to know about the jack?

view full answer...

Answer 6

Hello Brian, thanks for reaching out. That would be fine. There is really no need for a cut-off switch here but there is no reason why you can't use one. As long as the jack is connected to a 12v power source, it will operate as intended.

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Grease & Zerk Size For Blue Ox SwayPro

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching