Will the Curt PowerRide 5th Wheel Trailer Hitch item # C36WR Work w/ the GM Puck System?

Question

Question:

Will the Curt PowerRide PN C36WR work with the puck system in the new chevy silverados?

asked by: Don

0

Expert Reply:

Yes, it will! The Curt PowerRide 5th Wheel Trailer Hitch item # C36WR has legs that are built specifically to mount in the GM puck system in both the Chevy and GMC trucks built since 2020. This hitch has a massive 30,000 lbs capacity.

I have attached a couple of pictures below that will show you this 5th wheel hitch installed.

expert reply by: Jerred H

0

Curt PowerRide 5th Wheel Trailer Hitch
(click to enlarge)

Answer 1

The Curt PowerRide for GM tow package part #C36WR that you referenced weighs 91 lbs.

view full answer...

Answer 2

The reason the Curt PowerRide 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package #C36WR is listed as being compatible with only 8 foot bed lengths is because of turning clearance issues. A six foot bed typically requires a sliding hitch and a…

view full answer...

Answer 3

To pair the camera and monitor parts of your Furrion Vision S observation camera system #FOS43TASF you can try pressing the button on the bottom of the camera. Please refer to the linked photo. First disconnect power to both camera and monitor…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Scott. To add a 7-way and 4-way connector to your 2024 GMC Sierra 3500 that can be used at the same time, I recommend the TowSmart ProClass Trailer Connector item #TS49RR. It's going to replace the factory one and mount in the same position…

view full answer...

Answer 10

Hello Femi, Thanks for reaching out! Both the Demco Autoslide #DM39SV and #DM29GV are excellent choices for your 2026 GMC Sierra 3500 with the factory prep package, and both are compatible with your Grand Design Reflection 150 Series. The biggest…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Steve, welcome back! To add a set of air bags to your 2024 GMC Sierra 3500 dually, I recommend the Firestone item #F2613. These air bags have a 5,000 lbs capacity that are going to level out your rear end. Seeing as how you only tow a few times…

view full answer...

Will the Curt PowerRide 5th Wheel Trailer Hitch item # C36WR Work w/ the GM Puck System?

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching