Replacement Tail Block Locking Assembly for Yakima Rack and Roll Locking Lever

Updated 06/24/2026 | Published 09/08/2023

Products Featured in This Question

Replacement Tail Block Locking Assembly for Yakima Rack and Roll Trailer 2015 and Newer - Qty 1

(55)

$11.71

Replacement Control Key for Yakima Same Key System

(230)

$9.54

Question:

I have a 7 year-old Rack and Roll trailer. The part that snaps down to set and maintain the ed length of the trailors tongue has broken. Because this part is broken the trailors tongue length changes depending on whether Im back up or pulling it. Do you have that replacement part/and instructions on how to replace it?

asked by: Patrick S

Expert Reply:

It sounds like the tail block locking assembly broke on your # Y08106 locking lever. Since your Rack and Roll is the 2015 or newer model the correct replacement part is the # 8880334. You can remove the lock core using the control key # Y8007835 and the tail block will attach to the end of the lock core. You will be able to see how it slides in when you remove the old one from your trailer.

expert reply by: Robin H

Gerald T.

6/24/2026

I recently purchased a 2011 Rack n Roll Trailer and discovered the the locking mechanism attached to the lock core for the Tail Block Lever is missing. Does eTrailer carry a replacement for pre-2015 trailers or direct me towards other resources? Is there another solution for this year model?

Robin H.

6/24/2026

@GeraldT the locking mechanism for the older version is not something that we carry. I would reach out to Yakima directly to see if they still have any available or another solution if they don't.