Draw-Tite Trailer Hitch to Fit a 2022 Honda CR-V  

The correct Draw-Tite Max-Frame Trailer Hitch Receiver for a 2021 Honda CR-V Hyrbid is part #DT79MR. It will not be compatible with the factory hands free liftgate feature but you can retain this using a relocation bracket which can be obtained…

If you were to install both the Draw-Tite Max-Frame Trailer Hitch Receiver #DT79MR (76342) and #76128 on your 2022 Honda CR-V you'd find that the DT79MR is going to sit about 1/2" higher so these are relatively at the same height. With that…

The Draw-Tite Max-Frame Trailer Hitch Receiver item #DT79MR and the etrailer Trailer Hitch Receiver item #e98848 are nearly identical hitches. They both have a 3,500 lbs maximum towing capacity and a 525 lbs tongue weight limit. The main difference…

The reason the Curt Trailer Hitch Receiver #C13397 for your 2019 Honda CR-V requires you to use the lift gate sensor relocation bracket and the Draw-Tite #DT79MR does not is due to the crosstube to sitting lower which allows you to move the antenna…

When installing the Draw Tite hitch part #DT79MR there is trimming required of the rear fascia to allow the hitch opening to pass through. If you watch the install video I attached you can see the trimming outlined.

We have checked with the manufacturer on this in the past. We have confirmed that the Draw-Tite class 3 hitch #DT79MR will fit the 2024 Honda CR-V hybrid. This is a class 3 hitch with a 2" receiver. We have also confirmed fitment with several of…

The Draw-Tite Trailer Hitch #DT79MR will not fit the Hybrid model of your 2021 Honda CR-V, but you can use the etrailer Trailer Hitch #e98848 instead. This has the same basic design as the Draw-Tite hitch you were looking at so that only the hitch…

We do have plenty of hitches for your 2021 Honda CR-V touring hybrid. I recommend going with a class III hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver #DT79MR. Reason being is almost all hitch accessories like the Thule Hitching Post Pro…

I checked with Draw-Tite and they list the Draw-Tite Max-Frame Trailer Hitch Receiver part #DT79MR as a fit for a 2023 Honda CR-V all models so you will be good to go with a Sport Touring. I took a look at some of the review and there were instances…

The Curt Hitch part #C13397 is also a fit for your 2022 Honda CR-V and is a very similar to design to the EcoHitch that fits your vehicle #306-X7345 with same weight capacity but at a better price point. This would work great with a bike rack like…

Our fitguide can be somewhat confusing at times but the EcoHitch part #306-X7345 that you referenced does fit the Hybrid and Touring models. It also fits the models that aren't Hybrid and Touring which is why you saw the message you mentioned.…

The price difference is pretty staggering between the EcoHitch part #306-X7345 and the etrailer part #e98848 and considering there really isn't a big advantage one has over the other the choice seems to be pretty easy to go with the etrailer…