How to Pick Out Bearing Buddy for 2005 Arctic Fox 29V
Updated 07/24/2023 | Published 07/23/2023
Question:
I have a 2005 Arctic Fox 29v trailer Silver Fox Edition. Would you happen to know the size Bearing Buddy caps I would need? Thanks
asked by: Dennis P
Expert Reply:
I don't have a way to look up what Bearing Buddy your 2005 Arctic Fox 29V uses. In order to pick out the correct bearing buddy you will need know the pilot hole of your hub. To do this, remove the wheel and tire and remove the grease cap from the center of the hub. Usually it is a metal cap that is just lightly hammered into place. Use a screwdriver to pry off the cap.
Clean the grease off and measure the opening. I have included a video demonstrating the Bearing Buddy.
The Bearing Buddies # BB1938 that you referenced are for hubs with a 1.938 inch hub bore.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1938 - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.94 Inch
- 2000 lbs Axle
- Bearing Buddy
more information >
Continue Researching
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
- Q&A: How To Tell What Size Bearing Buddy Is Needed for My Trailer Hubs
- Article: Most Popular Wheel Bearings
- Article: Trailer Lighting Requirements
- Q&A: Where is the Brake Controller Wiring on My 2022 Chevrolet Trailblazer?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: What Bearing Buddy Is Closest to Correct Size for Hub Bore Diameter of 2.3125 inches
- Q&A: Recommendation for Replacing Tires on 6x10 Utility Trailers
- Q&A: Do You have Grease Caps for a 1.935 Bore Diameter Hub
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision