Recommended Flat Towing Parts for a 2007 Ford Expedition

Updated 07/16/2023 | Published 07/15/2023

Products Featured in This Question

Roadmaster Direct-Connect Base Plate Kit - Removable Arms

(3503)

$575.00

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3392)

$162.09

Roadmaster Sterling All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 8,000 lbs

(158)

$1375.00

RoadMaster 68" Single Hook, Coiled Safety Cables - 6,000 lbs

(669)

$61.24

Question:

I have a 2007 FORD Expedition Special Edition 2WD in San Diego that I want to connect a tow bar for flat towing. Can you tell me what pieces I need to do this? Please advise at your soonest.

asked by: Thomas M

Expert Reply:

To flat tow your 2007 Ford Expedition you will need the following parts:

Tow Bar and Safety Chains - Roadmaster Sterling All Terrain Tow Bar item # RM-576 and item # RM-643

Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # 4410-3

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.