Is There a Spacer For the Furrion Vision S Side Cameras To Work On a Recessed Application?

Updated 06/22/2023 | Published 06/21/2023

Products Featured in This Question

Timbren 1/2" Spacer For Raised Frame Vehicles - 1/2" bushing

(25)

$8.56

Timbren 1" Spacer For Raised Frame Vehicles - 1/2" Bushing

(28)

$16.57

Question:

My Class A has recessed side marker lights. Is there a spacer available that would allow these to be used?

asked by: Craig

Expert Reply:

While we do not have a specific spacer for the Furrion Vision Side Cameras # FCE48TASL the 1/2" Spacer # TA25722-90F00 would be a good starting point. We also have it in a 1" Thickness # TA25723-90AD00 depending on how deep your recess is. These spacers already has a 1/2" hole through the center of it for running the wiring, and its polyethylene construction is not going to rust out over time. These will most likely need to be trimmed down to fit your opening. I find it best to use a fine tooth blade when cutting similar to how you would cut metals.

You will still want to use Silicone # FAS59FR to ensure water does not get into the walls of your class A camper.

expert reply by: Bud M