Replacement Master Cylinder & Reverse Lockout Solenoid for a AFP A-75 Actuator

Updated 06/19/2023 | Published 06/16/2023

Products Featured in This Question

Replacement Master Cylinder Assembly for Dexter Brake Actuators - Drum Brakes

(19)

$120.56

Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts

(272)

$75.91

Question:

Would this master cylinder work on a boat trailer that has drum brakes or is the pressure higher than the TK71-756-00 master cylinder intended for drum brakes? I have the UFP A-75 actuator and would be nice to have the reverse solenoid integrated into the master cylinder. I dont think there is enough room in the hitch cutout to use the TK71-756-00 master cylinder and the T4748800 solenoid. If not, I know the other option is to change the brakes to the free backing type or continue using the manual reverse lockout. Thanks!

asked by: Steve

Expert Reply:

The Replacement Master Cylinder Assembly for Dexter Brake Actuators # TK71-756-00 you're looking at is designed to be used with drum brakes so it'll work just fine as a replacement for your UFP A-75 actuator.

As far as having enough room goes, the reverse lockout solenoid # T4748800 only measures 3" from end to end so I don't see how you'll run into any issues with it fitting.

expert reply by: Bryce D