Correct Replacement Lens for a Petersen 440-15 Taillight
Updated 06/13/2023 | Published 06/11/2023 >
Question:
I have Peterson 440-15 tail lights. Along with a main lens one of the red side marker is broken. It doesnt use screws to hold it in, rather it just snaps into a couple of slots and the tabs hold it in. Do you have the replacement for this? Thanks for the help...
asked by: Tony W
Expert Reply:
According to Petersen the correct replacement lens for their 440-15 lens is the Replacement Stop/Tail Red Lens for Peterson Incandescent Square Combination Tail Lights # 440-15R.
This is going to be a direct replacement for the 440-15 taillight you have currently. I went through all of the replacement lens's for their 440-15 taillights and they all use the same # 440-15R lens.
Product Page this Question was Asked From
Replacement Stop/Tail Red Lens for Peterson Incandescent Square Combination Tail Lights
- Accessories and Parts
- Trailer Lights
- Light Lenses
- 4-1/2 Inch Wide
- 4-1/2 Inch Long
- Square
- Red
- Peterson
more information >
Continue Researching
- Q&A: Availability Of 2" Long 1/2" Wheel Stud With 0.56" Spline
- Q&A: Possible Light Replacement For Monarch 5129 On 1977 Great Divide Trailer
- Q&A: Replacement Kwikee 909506000 Controle Module
- Q&A: Replacement of Norcold 1200LRIM with Everchill # WAY44FR
- Q&A: Is 440-15R The Correct Replacement Lens for Monarch 5124 Tail Light
- Q&A: Replacement Lens for Optronics ST60RS / ST60RB
- Q&A: Can E-Track be Installed in Car Hauler for Multiple Car Widths
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Lighting Requirements
- Article: Best Landing Gear
- Article: Trailer Jacks
- Article: How to Measure for Trailer Hitch Drop
- Article: Troubleshooting 4 and 5-Way Wiring Installations

