Correct Thru-Axle Adapter for the Rhino Rack Road Warrior Bike Carrier

Question

Question:

What adapters are needed for the fork mounts to convert to quick release vs. solid axle?

asked by: Aaron J

0

Expert Reply:

I had to do some digging, but I believe you're looking for the Rhino-Rack Multi Axle Adapter for Fork Mount Bike Racks # RRRBCA030.

This will replace the 9MM quick release skewer that's on the Rhino-Rack Road Warrior Rooftop Bike Carrier - Fork Mount # RBC036, and can be easily swapped to work with 12-mm, 15-mm, and 20-mm thru axles.

expert reply by: Bryce D

0

Answer 1

The Rhino-Rack #RRVA180B-RRRLT600 has 71" crossbars so you will have plenty of room to add a kayak carrier with the Yakima HighRoad Roof Bike Rack #Y22DJ. The Rhino-Rack Kayak Roof Rack #S512-S512X you looked at would be a great choice,…

view full answer...

Answer 2

I did see the review saying they used spacers for the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers - 71" Long #RRVA180B-RRRLT600. This system will be approximately 4-1/4" to the top of the…

view full answer...

Answer 3

Thanks for the photo, and yes, the LockNLoad will indeed fit to Rhino-Rack Vortex aero crossbars like your Rhino-Rack Vortex Crossbars for Retrax XR #RRVA180B-RRRLT600. You'll just need adapters to mount the platform, and here are the part…

view full answer...

Answer 4

For a heavy-duty kayak carrier for your Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600, I recommend the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs - J-Style #S512-S512X. The Rhino-Rack 2…

view full answer...

Answer 5

I would be happy to help you. The RetraxPRO XR Hard Tonneau Cover item #RTT-80384 is the correct tonneau cover for the 8 foot bed model 2022 Ford F-350. I recommend the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…

view full answer...

Answer 6

The Thule ProBar Evo Crossbars #TH713700 could certainly work, but you have other options and I wouldn't really recommend them. Instead, I would go with the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers…

view full answer...

Answer 7

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 8

Sounds like you have a 2004 through 2007 Ford F-150 with a 6-1/2 foot bed that you are wanting to install a tonneau cover and crossbars above the bed on. I have a great solution for that but we don't have a way to do that with a Truxedo Sentry…

view full answer...

Answer 9

What I would do is go out to your truck and measure out 71 inches and 65 inches on a tape measure and compare that to the width of your bed. If you think the 71 inch looks better and would suit your needs then that's what you would want to go…

view full answer...

Answer 10

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers are compatible with a Roll-N-Lock Tonneau Cover that have the MaxTrak System. The tracks are the same as the ones on other tonneau covers so there will be no…

view full answer...

Answer 11

Hey Peter, There unfortunately are no type of extensions for the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. There are just spacers for it so the crossbars sit up higher from the Retrax XR…

view full answer...

Answer 12

Thanks for reaching out about the Rhino-Rack Kit #RRVA180B-RRRLT600, Eric! The rubber strips will go into the top channel while the plastic pieces with measurements will go in the bottom channel. The strips have the measurements on them so it's…

view full answer...

Correct Thru-Axle Adapter for the Rhino Rack Road Warrior Bike Carrier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching