Is the Universal Cam-Door Lock # 383200 Made of Steel and Mounting Hole Spacing of Cam Bracket
Updated 02/20/2014 | Published 02/18/2014
Question:
On the pipe to be supplied by the customer, you say to use steel pipe. Does that mean the hooks in the kit are steel as well as the handle? We can weld steel to steel. The parts we are replacing are aluminum. Also, what is the distance between the mount holes for the hook pockets?
asked by: Scott K
Expert Reply:
I went out to the warehouse and pulled a Universal Cam-Door Lock # 383200. I used a magnet to determine the parts are steel but the grade of steel is not listed.
For the bracket that the hooks part would go into the mounting holes are 4 inches apart on center.
Product Page this Question was Asked From
Cam-Action Lockable Door Latch for Small Trailers and Trucks - Zinc Plated Steel
- Trailer Door Latch
- Latches
- Cam Door Latch
- Steel
- Lock Not Included
- 5-1/8 Inch Long
- 1 Inch Wide
- Polar Hardware
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Does the Pipe Attach to the Cam Lock Assembly on Polar 658-002?
- Q&A: Changing a Trailer Ramp Door To Barn Doors On A 6x14 V-Nose Enclosed Trailer
- Q&A: Recommended Door Latch for Enclosed Trailer
- Q&A: Maximum Load Capacity for 205/75-15 Tire and Wheel Combo
- Q&A: Recommended Handle Latch Kit for Barn Door on Dump Trailer
- Q&A: Dimensions for Mounting Holes on Polar T-Handle Latch
- Q&A: Replacement Hinge Options for a Featherlite Horse Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Maintenance Schedule
- Article: Trailer Wiring Diagrams
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Slipper Spring Trailer Suspension System Review
- Article: What To Look For When Buying Ratchet Straps
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide