Will The Curt Trailer Hitch Receiver # C95CR Fit a 2022 Acura RDX A-Spec Advance?

Published 04/19/2023

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(101)

$180.05

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(44)

$53.14

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(38)

$62.27

Question:

Does this C95CR hitch also work on a 2022 Acura RDX A-Spec Advanced trim yes its both A-Spec and Advanced?

asked by: Andrew K

Helpful Expert Reply:

Yes, the Curt Trailer Hitch Receiver # C95CR will fit your 2022 Acura RDX A-Spec Advanced. While we have not completed the installation in our shop on your exact vehicle the installation will be the same as the A-Spec we had in our shop and I linked the install video below.

I recommend installing a 4-way when you install the receiver. To determine if your RDX has the 12-Volt Power Provision you will need to access the 8-pin connector inside your Acura to see if it has 2 red wires in the factory side of the connector. The only other way would be to contact a Acura dealer to have them look up your vehicle and see if it has the This connector is located on the drivers side above the rear portion on the rear fender(see image).

If you only have one red wire you do not have the provision and will need the Tekonsha T-One Vehicle Wiring Harness # 118804.

If your connector has 2 red wires you do have the provision and will need the Tekonsha T-One Vehicle Wiring Harness # 118800.

expert reply by: Bud M