How Far Do the Front Jacks Extend on the Lippert Ground Control 3.0 5th Wheel RV Leveling System

Question

Question:

I’m curious to know how far will the ground control 3.0 fifth wheel front jacks extend? I understand the rear jacks can extend 12 1/2 inches. I read where the front jacks can extend 36”. Is that an over total of 36 or is that how far travels without extending the leg that has the pad stretched to it?

asked by: Bill L

0

Expert Reply:

The rear jacks on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 do travel 12-1/2" and the front jacks travel 21". But, the front jacks also have a drop leg that can extend up to 17 additional inches..

expert reply by: Scott S

0

Answer 1

Hello Mary, thanks for reaching out. Yes we do sell individual replacement SnapPads, but there is no way for me to look up your RV to know exactly what size/shape you need. I will just need to know the diameter and shape of your jack feet. For…

view full answer...

Answer 2

There may be a bunch of different reason why your Lippert Level-Up system has suddenly stopped working. The most common reasons are due to a dead battery, extending your jacks too far, or a blown fuse. The first thing you should check for is the easy…

view full answer...

Answer 3

The Lippert Ground Control 3.0 #LC358590 is a great system that is pretty much universal and could be installed on your RV, but it will won't be able to extend far enough for your RV to sit level where it is at without utilizing blocks like you…

view full answer...

Answer 4

Here is a list of all the Lippert Level Up replacement jacks we offer. Currently this is the only way Lippert offers their jacks and they do not offer a rebuild kit for these. Replacement Hydraulic Jack Assembly for Lippert Level Up RV Leveling…

view full answer...

Answer 5

To find the correct replacement equalizer and wet bolt/shackle strap kit for your 2024 Grand Design Imagine XLS 22BHE you'll need to first take a few measurements. For the equalizer you'll want to measure from center to center of the shackle…

view full answer...

Answer 6

For the Road Armor Equalizers #LC696740 you're going to install on your trailer, you don't have to install the premium MORryde Wet Bolt Kit #MR76ZR you were looking at if you don't want to spend that much, you could go with the Lippert…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey, Nicholas! First I'd like to say that you helped me learn something new today. I look up your team and watched the promo video on your universities website. Look like a lot of fun! I watch Formula 1 with my dad from time to time but…

view full answer...

How Far Do the Front Jacks Extend on the Lippert Ground Control 3.0 5th Wheel RV Leveling System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching