Can the Latch on the Valterra Replacemet Cam Lock Be Bent to Clear Weather-Stripping?

Updated 03/01/2023 | Published 02/28/2023

Question:

I found that the locking tab will not clear the weatherstripping in the compartment door when turning. Is the tab pliant enough to be bent outward about 1/8-inch to clear the weatherstripping? Would a better approach be to use spacers if there are enough threads on the screw to accommodate them? Many thanks. You guys are great.

asked by: Bruce F

Expert Reply:

Since you're only trying to bed the latch # A522VP 1/8" to clear the weather-stripping you shouldn't have any issues as it isn't that much of a bend.

While the metal is pliable to be bent, the easiest option would be to use a spacer to give you the appropriate spacing.

I recommend just stacking 3/4" washers to get the desired 1/8" spacing.

expert reply by: Bryce D