What Does Error Code 16 on Air Lift WirelessAIR Compressor System for Air Helper Springs Mean

Updated 12/10/2024 | Published 02/18/2023

Question:

Hi, I have the airlift 5000, with the ez pump setup. I have an error message, compressor error 16. What does that mean

asked by: Travis F

Expert Reply:

I looked up the "16" error code on the Air Lift WirelessAIR Compressor System for Air Helper Springs part # AL74000EZ in the owner's manual for you. I found the following information:

Cause - Compressor hose disconnected from manifold or blockage in the compressor or system which is preventing air flow.

Solution - Check hose connections. Check for system blockages or frozen moisture in the air lines. Remove and reinstall the 15A fuse to reset the fault.

If you still continue to have issues with the system after the above is preformed, please let me know and I would be happy to assist further

expert reply by: Conner L

Javen

12/6/2024

Hi I double checked my lines and removed and re installed fuse and still getting the code #16

Kevin C.

12/10/2024

@Javen How long did you leave the fuse out for? Did you check the voltage to the compressor as well to ensure it's getting a full 12 volts? Checking power and ground to unit is always a good first step to rule out.