What Are The Height Positions of CIPA Pontoon Boat Mirror
Updated 02/20/2023 | Published 02/18/2023
Question:
What are the four 4 height positions in inch or mm the mirror can be adjusted to? Please let me know. I intend to mount this mirror on a 21foot Sea-Doo Switch Pontoon Boat. Thank you Rolf
asked by: Rolf H
Helpful Expert Reply:
The description for the CIPA Pontoon Boat Mirror # CM01877 is incorrect. There are more than 4 height positions. The 20" extension is measured from the bottom of the mirror to where the pole slides into the mounting bracket. When fully retracted this distance is 12.5". The extension can be set to any height between the retracted and extended measurements.
I have attached a review video below for your reference. You can see where the mirror is extended and retracted using the tension nut which allows you to lock it in any height position you need.
Product Page this Question was Asked From
CIPA Pontoon Boat Mirror - Clamp On - Black Powder Coated Aluminum
- Boat Mirrors
- Boat Mirrors
- Convex Mirror
- Clamp-On
- 11-1/8L x 3-7/8W Inch
- Black
- CIPA
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Are Clamp-On Boat Mirrors Available for Sea Ray?
- Q&A: Can I Use the CargoSmart S-Curve Loading Ramp Set for a 1800 Pound SxS?
- Q&A: Width of Mounting Board on CE Smith Outboard Motor Dolly
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Q&A: Can a Load Range C Tire Be Replaced with a Load Range D Tire
- Q&A: Can My Spare Trailer Tire Be A Lower Load Range Than The Rest Of My Tires
- Q&A: Replacement Oil Bath Hub Drum for 8 on 6-1/2 Bolt Pattern on 8,000 lb Axle
- Q&A: Replacement Hub Drum Recommendation to Replace One with Grease Seal 10-36