Recommended Hub w/ a 8 on 5-1/2" Lug Pattern and a 28580 Inner Bearing
Updated 02/17/2023 | Published 02/16/2023
Products Featured in This Question
Question:
I have an old late 70s early 80s dump grain trailer. It has 12×2inch drums. 8 lug, 1/2inch stud, 2.5inch stud spacing, Inner bearing number 28580. I think spindle #99. Looking for a new brake drum. Axle is a 58inch spring center if that helps.
asked by: Philip G
0
Expert Reply:
Thanks for the information. For a 8 on 5-1/2" lug hub with a item # 28580 inner bearing you'll want the Dexter Trailer Hub and Drum Assembly item # 42866UC3. This is a 12" diameter hub that fits 5,200 lbs to 7,000 lbs axles. It fits a item # 14125A outer bearing.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: Should Trailer Equalizers have Side to Side Movement When Installed
- Q&A: What Size and Thread Pitch is the CE Smith Tapered Spindle Axle CES98WR?
- Q&A: Weld-On Spindle for Trash Trailer Without Suspension
- Q&A: Recommended Replacement Square 1.5" Spindle for a Boat Trailer
- Q&A: Can Redarc Tow Pro Elite Brake Controller Install 2020 Dodge Grand Caravan with OEM 7-Way
- Q&A: Replacement Hubs for 2000 Coleman Sedona
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Will a Dexter Trailer Hub Fit on a Lippert Trailer Axle
- Article: Where to Position the Trailer Axle?
- Article: Most Popular Wheel Bearings
- Article: Trailer Wiring Diagrams
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Holiday 2025 | Staff Picks for Real-Life Adventures