Recommended Cabinet Door Hinges For A Hidden Look

Question

Question:

I have a flush mount cabinet door I wish to put hinges on. Need recommendations,

asked by: Dave Y

0

Expert Reply:

The only cabinet hinges we carry that could possibly work with the cabinet doors you have is the Spring Support RV Cabinet Door Hinges # 37270705. These fold and are spring loaded to fit the style of cabinet door you've built. They give you some screws to mount it but they're pretty small so I personally would use something a bit larger to fully secure it in place.

You'll most likely need to add some sort of strip on the inside of the cabinet at the top of the hole for the other end of the hinge to mount into as well.

expert reply by: Kevin C

0

Hidden Cabinet Door 1
(click to enlarge)

Hidden Cabinet Door 2
(click to enlarge)

Hidden Cabinet Door 3
(click to enlarge)

Answer 1

Yes, the hinge part #37270705 that you referenced can be used on overlay doors like you have.

view full answer...

Answer 2

One side of the Spring Support RV Cabinet Door Hinges #37270705 gets screwed to the inside of the cabinet and the other side is screwed to the cabinet door. The hinges are labeled as to what side goes on the cabinet door and which goes inside the…

view full answer...

Answer 3

There's not a stronger version of the Spring Supports #37270705 you have for your custom cabinets, but you should be able to add these struts #37270545 to add more resistance for keeping the cabinets open. Keep in mind these are designed for…

view full answer...

Answer 4

The etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity, #e99044 is compatible with your Scamp as it fits 1-7/8", 2", or 2-5/16" ball couplers. If your Scamp was ordered with a jack that has a 2"…

view full answer...

Answer 5

The LED Porch and Utility Light with On/Off Switch for RVs part #DG52728VP is considered a bright or cool white light. While I can't find the exact color temperature it is very near a 6000-6500k color seen with bright and cool rather than the…

view full answer...

Answer 6

If your truck camper's rear Rieco jacks have contacted the front of your box trailer you'll need either a longer SuperTruss extension like the 48-inch #TLE1548 or an extra long ball mount #EA40 to increase your turning clearance. This 2-inch…

view full answer...

Answer 7

There isn't a specific clearance number that is needed between a travel trailer and tow vehicle rear bumper, as it will really depend on several factors including the width of both the trailer and your motorhome. A V-Nose trailer like what you…

view full answer...

Recommended Cabinet Door Hinges For A Hidden Look

Product Page this Question was Asked From

Continue Researching