Will Trailer Suspension Hanger Kit # APT5 Fit a Trailer with 2-3/8 Inch Diameter Axle
Updated 01/09/2014 | Published 01/08/2014 >
Products Featured in This Question
Question:
Hi, Could I use this kit with a 2 3/8 axle I see the sizes are listed for 3inch axle but I have 2 - 2 3/8 axles that i am looking to mount on a trailer that needs the extra clearance and also needs the height to level out the trailer.
asked by: Edward S
Expert Reply:
You can use the Tandem-Axle Trailer Hanger Kit # APT5 for your trailer with the 2-3/8 inch axle. A 2-3/8 inch diameter axle is typically found on 3,500 pound axles which is within the range of this kit (2,000 to 7,000 pound axles). The measurements in the chart on the page can be used as a guide.
A better option for a 2-3/8 inch axle is kit # APT3, # AP233-H248, or # APT1. It all depends on the axle spacing, spring measurements, and equalizer length.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double Eye Springs - 3-1/4" Tall Front/Center/Rear
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- etrailer
more information >
Continue Researching
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Troubleshooting Slanted Equalizer on Unloaded 7K Cargo Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Availability of USA Made Bearing Kit for 3,500 lb Trailer Axle
- Article: Where to Position the Trailer Axle?
- Q&A: Is the BTBRV InstaLatch Ball Mount Suitable for a Boat Trailer
- Q&A: Why is Center Hanger Longer for Tandem Axle Trailer Hanger Kit
- Article: Trailer Wiring Diagrams
- Q&A: Can The etrailer Dual-Pin Two-Speed Jack Be Used For A Landing Gear Set?
- Q&A: Will 7-3/4" Long Equalizers Work In Place of 6-1/2" Long Equalizers
- Article: Most Popular Wheel Bearings

