Can You Install a Rubber Hose Between the Tank and MB Sturgis Sturgi-Stay T-Fitting

Updated 01/03/2023 | Published 12/30/2022

Question:

2001 Coachman Mirada 280QB I am unable to put a extend a stay kit on because I have no room for a tee. The pipe that runs from regulator to furnace is copper all th way . Could I add a hose to go from regulator to copper pipe to give me some flexibility? If so what do I need. Thank you

asked by: Bridget

Expert Reply:

The MB Sturgis Sturgi-Stay T-Fitting part # 103602-MBS should be threaded directly into the tank. If you don't have clearance for this on your setup you may need to purchase some adapter fittings or alter your existing setup. That said, there isn't any sort of rubber hole that would connect the tank to the tee. If you have hard lines, you can use them with this tee so long as the fittings are correct.

I can't comment on which exact adapter you need for your setup but you can take a look through or selection below or try and source one locally.

expert reply by: Conner L