What Guage Wire Does Hopkins 4-Way Trailer Wiring Harness Use
Updated 12/27/2013 | Published 12/23/2013
Question:
HM48240 what gauge wire is in the harness?
asked by: Don
Expert Reply:
The Hopkins 4-Way flat Trailer Wiring Harness uses 18 awg stranded wire for the right turn, left turn and tail light functions. The ground wire is 16 awg.
Hopkins does a really nice job with this harness, they have each of the wires marked about every six to eight inches with the function of each of the wires. Each of the wires also has the color coded stripe that correlates to the function.
The green striped wire is for your right turn, the brown striped wire is taillights and the yellow striped wire is the left turn function.
Product Page this Question was Asked From
Hopkins Endurance 4-Way Flat Trailer Wiring Harness - 20' Long
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 4 Flat
- Plug and Lead
- Hopkins
more information >
Continue Researching
- Q&A: Replacing The Wiring Harness On A Demco Kar Kaddy SS
- Q&A: Replacement 30" Fireplace for 2012 Tiffin Phaeton
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Replacement A/C Shroud for a Dometic Duo-Therm Model 57908.321
- Q&A: Replacement Coupler Parts
- Q&A: Disc Brake Assemblies For Changing A 12,000LB Dexter Axle To Hydraulic Disc Brakes
- Q&A: What are the Dimensions of a #99 Spindle
- Q&A: Correct Bearing Kit and Brakes for Timbren Axle-Less 3,500 System with 4" Lift
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Basics of Tie Down Straps
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations