How to Tell if 8K etrailer Axles Will Fit Trailer
Published 11/29/2022
Question:
How do I know if this will fit my trailer?
asked by: Alec
0
Expert Reply:
To determine whether or not the 8K Trailer Axle w/ Electric Brakes # e83SR will fit your trailer you'll need to take hub-face and spring-center measurements. Hub-face is where the wheel mounts to the hub while spring-center is literally where the middle of your leaf springs are.
I've attached a photo showing these as well as a video that goes over this for you to check out.
expert reply by:
Jon G
0
Hub-Face and Spring-Center Dimensions for etrailer 8K Axle
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Trailer Axle w/ Electric Brakes - Easy Grease - 8 on 6-1/2 Bolt Pattern - 95" Long - 7,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 7000 lbs
- 8 on 6-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Availability of Replacement 7k Axle With 93" Hub Face Measurement
- Q&A: Differences in the Dexter and etrailer 7,000 lbs Axles w/ 8 on 6-1/2 Hubs
- Q&A: Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
- Q&A: Do You Have Brackets and Fenders for Trailer in a Bag?
- Q&A: Can Dexter 8-222 Hub be Replaced with 6 on 5-1/2 Inch Hub on Tandem 4 Ton Trailer
- Article: How to Install E-Track in 3 Easy Steps
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Replacement Equalizers, Bolts, Bushings And Shackle Straps For Tandem Axle Horse Trailer
- Q&A: Replacement Leaf Spring for a Dexter 072-98-02 Leaf Spring
- Article: Where to Position the Trailer Axle?
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer