Parts Needed To Replace Slipper Spring With Double Eye Leaf Springs On a 2002 Coleman Mesa 3651

Updated 10/17/2022 | Published 10/16/2022

Products Featured in This Question

Rear Hanger for Double-Eye Springs - 1-9/32" Tall - 9/16" Bolt Hole - Single Axle Only

(31)

$3.34

4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 25-1/4" Long

(2050)

$49.38

Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs

(1008)

$103.09

Dexter Single Axle Heavy Duty Suspension Kit - Double Eye Springs

(119)

$36.44

Question:

Im seeking replacement leaf springs for my 2002 Coleman Mesa 3651. Need to know the direct replacements and the eye bolts that fasten them to the front shackles. They are a slipper on the back, bolt up in the front. Thanks in advance

asked by: Robert S

Expert Reply:

As we will not have a slipper spring that fits your 2002 Coleman Mesa 3651 I recommend upgrading to a double eye leaf spring system. You will only need to change your Rear Hanger # 93003-3X on each side to be able to install 2 of the 4-Leaf Double-Eye Springs # e54SR. The Dexter Single Axle Heavy Duty Suspension Kit # K71-403-00 will give you the necessary new hardware to mount the springs to the frame. I recommend upgrading to the Wet Bolt Kit # K71-358-00 to cut down on noise and provide better articulation of the suspension.

expert reply by: Bud M