Correct Solera Slide Topper Awning for 81" and 84" Trailer Slide-Out

Question

Question:

Wondering if the measurements shown on the slide toppers is the fabric measurements ? Looking at three of my slide outs measure 81 inches at the flanges and one is 84 inches. What sizes would you recommend ?

asked by: Stephen M

0

Expert Reply:

The correct Solera RV Slide-Out Awning for an 81" and 84" slide-out is part # LCV000165062 for black or part # LCV000163287 for white. The awning fabric measures 85" long.

expert reply by: Conner L

0

Answer 1

It sounds like you are looking for the Solera RV Slide-Out Awning - 6'7" Wide - 48" Projection - Black #LCV000168105 which will fit your 76" slide out perfectly and has black fabric to match the picture you provided. The Solera…

view full answer...

Answer 2

For a satin black Solera slide topper to fit the flange dimensions you took of 153-3/8 inches you'd want the part #LCV000168109 which is satin black in color. Then for the flange dimension of 84-1/16 inches you'd want the part #LCV000165062…

view full answer...

Answer 3

I have linked the installation instructions for one of our Solera Slide-Out Awnings #LCV000165062 below. While the mount for these have changed from the Replacement Mounting Hardware #LC701665 you will still be able to see how everything is…

view full answer...

Answer 4

The bracket you have broken is part of the slide out awning roller and could only be replaced by going with an all new assembly like with the part #LCV000165062 which would be correct if you needed a roller that measures 7 foot 1 inch. There's a…

view full answer...

Answer 5

Thanks for attaching a photo of the awning rail on your Flagstaff camper. The typical slide topper awning will fit into the round track of your existing awning rail. For instance, if your slide was just under 7 foot wide, then the Lippert…

view full answer...

Answer 6

In regards to the Solera Slide Topper Awnings, the overall width is actually adjustable so I don't have an exact figure for you. This is because you can slide the hex extension rod in and out of the support arm bracket. The correct way to choose…

view full answer...

Answer 7

The outer brackets (hexagon heads) have changed with the Solera 5000 Series slide toppers so you'll have to slide them off of the inner brackets to install the Solera RV Slide-Out Awning #LCV000165062. You can leave the inner brackets mounted to…

view full answer...

Answer 8

We have exactly what you need, with the Solera RV Slide-Out Awning and does include the rail, and I'll give you the part numbers based on your measurements. - 84-1/2": Solera RV Slide-Out Awning #LCV000165062 (Black) or #LCV000163287 (White)…

view full answer...

Answer 9

Since the minimum clearance needed to fit a slide topper is three inches from the slide out and in your case the main awning you do have enough clearance to install one. Since your slide out is 83 inches wide the correct slide topper you need is the…

view full answer...

Answer 10

Thanks for the question! When adding a slide topper there are time we can put these on a camper that has an awning already on the slide and times that we can't. In your case there isn't the 4" of room we would need to put it on. The…

view full answer...

Answer 11

To install a slide topper like the Solera RV Slide-Out Awning #LCV000168110 on a slide that already has a regular awning installed you will need to take a few measurements to ensure enough clearance. From the outside edge of the slide flange to the…

view full answer...

Answer 12

Measuring to pick out the correct slide topper for an RV like your 2018 Forest River Rockwood is pretty easy. You have to measure the box width including the flange on it and you'll be set. So the Solera part #LCV000163288 that you referenced is…

view full answer...

Correct Solera Slide Topper Awning for 81" and 84" Trailer Slide-Out

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching